DISTEK Dissolution and Pharmaceutical Test Instruments
DISTEK > Dissolution > VIP 4400
Distek VIP 4400 Vessel Washer
The VIP 4400 addresses one of the most time consuming and least productive aspects of the
dissolution test: Dissolution Vessel clean-up. Customers employing the VIP 4400 are guaranteed
to save time, reduce cost and increase the output of the dissolution laboratory by eliminating the tedious process of removing, draining and cleaning dissolution vessels.
-
Patented "Cyclone" Wash
The “Cyclone” wash nozzle and drain have been integrated into one assembly offering a 360 degree wash that provides a more thorough cleaning of the entire vessel that takes only 30-45 seconds.
-
Self-Adjusting Drain
The spring loaded, self-adjusting drain automatically compensates for vessel height variations, minimising residual wash water remaining in the vessel after cleaning.
-
Universal Wash Module
Securely fits into any 1 litre USP conforming dissolution vessel regardless of the manufacturer.
-
Cleans up to 4 Baths
Cleans up to 28, 1 litre vessels in under 15 minutes.
-
Rapid Drain & Wash Cycles
Throughput is greatly increased as the VIP 4400 can drain and wash a 1 litre vessel in approximately 30 seconds.
Ordering Information, Accessories and Parts
ORL-2022-4423
Model VIP 4400 In-Situ Dissolution Vessel Washer, 230V
ORL-2600-0027
Shaft Rinse for VIP 4400. Wash Wand for Rinsing of Shaft and Stirring Element Prior to Vessel Washing
ORL-2600-0038
230V Heater for VIP 4400 Rinse Tank. Permits the Heating of Rinse Media from 25-60 Degrees C
